Technical
FLOORING
The marquee has a suspended timber floor covered with navy blue exhibition grade carpet.
CONSTRUCTION
Stands are constructed from timber framed plywood faced panels, and most are double sided. Single faced panels are used for the back walls of stands at the edges of the marquee.
All panels:
are painted in magnolia with blue trim
are 2.2m high
measure 57mm (thickness)
Each stand is finished with a header board bearing your trading name, except for some double length and corner stands where this may not be possible.
The frontage measurement of each stand is always calculated to centres of the panels. When planning your display some tolerance should be allowed on either side.
A run of stands, and diagram of a panel.
FIXINGS
The panels are designed to bear lightweight fittings, and solid timber batons are located vertically every 500 mm within each panel and around the edges.
The recommended fixings include:
double-sided Velcro
small screws
cup hooks
We suggest that free-standing shelving which might become top heavy is secured to the panels where possible.
ELECTRICAL
Each stand is fitted with:
A 13 amp double power point with a load tolerance up to 3 KW or 3000 watts. A 16 amp fitting which provides up to 3.5 KW or 3500 watts is available on request
Track spot lighting with a minimum of 3 adjustable spot lights per stand. On larger stands the lighting may be suspended from the roof
Ceiling fans are installed in the marquee in warm weather
TABLE HIRE
Tables are available for hire if booked in advance. The dimensions are:
1830mm (l) x 690mm (w) x 760mm (h) i.e. 6’ (long) x 2’3” (wide) x 2’6” (high).
