Technical
FLOORING
A suspended timber floor covered with burgundy coloured exhibition grade carpet.
CONSTRUCTION
Each stand is constructed from stained tongue and groove panels most of which are double faced. Single faced panels are used for the back walls of stands and at the edges of the marquee.
All panels are 2.2m high with internal vertical timber batons every 500mm
Panels measure 100mm thickness
Stand frontage is measured to centres of boundary panels and some tolerance should be allowed either side of your display
Each stand is finished with a 100mm header rail and header sign bearing your trading name
FIXINGS
Recommended fixings include:
double-sided Velcro
small screws
cup hooks
We recommend that free-standing shelving is secured to the panels where appropriate.
ELECTRICAL
Each stand is fitted with:
A 13 amp power point with a load tolerance up to 3 KW or 3000 watts. A 16 amp fitting which provides up to 3.5 KW or 3500 watts is available on request
Track spot lighting with a minimum of 3 adjustable spot lights per stand. On larger stands the lighting may be suspended from the roof
Ceiling fans are installed in the marquee in warm weather
TABLE HIRE
Tables are available for hire at all venues if booked in advance. The dimensions are:
1830mm (l) x 690mm (w) x 760mm (h), that is 6’ (l) x 2’3” (w) x 2’6” (h).
